I started with:
The card base measures 4-1/4" x 5-1/2".
The sliding pop-up mechanism measures: 4-1/4" x 5-1/2".
The pull up piece measures: 3-1/4" x 4-3/4".
This is to show you the placement of the Killer White Tearable Tacky Tape 1/4 I used. Make sure you don't place on the top where the opening will be, it is easy to decide by the half circle tab!
2. The picture on the right shows the front of the mechanism- At this point I have attached the pull up piece to the bottom of the moving mechanism part.
4. I checked myself several times before I pulled the tape strips to make sure the pull up piece would be correct but also that the sentiment I chose to use would show when the card was open.
I wanted to make sure my image would stay where I place it and be able to withstand being opened and closed several times.
6. I used an old button from my stash and cut off the shank so it would lie flat. I actually used a piece of the
Killer White Tearable Tacky Tape 1/4 to hold the button also.
She was colored with my Copic markers.
I sure hope you enjoyed my tutorial making a Sliding Pop Up Card this week.
This is another one of those cards that can be ordered in so many colors and used for any type card you might like to make.